Macbook repair - Macally Blog

How-to Guide for Spilled Water on Your MacBook Keyboard:

David Chen — Wed, 21 Jun 2023 19:20:39 +0000

ccidents can happen at any moment, one second you’re sipping your nice warm tea in the morning and the next you’re racing around your kitchen trying to find something to get it out of your MacBook. Today we’re discussing what to do when you’ve spilled water on your MacBook keyboard.

Whether it’s a faulty water bottle or a clumsy hand, the damage can happen in seconds and can lead to significant problems for your MacBook. In this guide, we’ll go through some step-by-step instructions to help you prevent any further damage, and hopefully, save your beloved MacBook from an expensive repair bill.

Step 1: Turn Off Your MacBook

First and foremost, quickly turning off your MacBook should always be the first step when you’ve spilled water on MacBook keyboards. Don’t try to save anything on your device, wipe up any spill or call for backup – turn it off as quickly as you can. It is essential to turn off your MacBook entirely, and quickly, to prevent any damage to the keyboard or the hardware components.

If you can get to the power button quickly enough, you can still save the device, as the liquid will take time to work its way through the device. To do this, press and hold the power button for 5-10 seconds until the MacBook shuts down. Make sure to wait until the screen goes completely black before releasing.

The reason this can save the device is quite simple. Water is a very good conductor of electricity, as the water makes its way through your device the electricity flowing around your components will then flow through the water damaging circuits as it comes into contact. By Removing the power from the component you eliminate that possibility.

However, there are still further complications and we’ll discuss those further on.

Step 2: Remove The MacBook Bottom Cover

The next step when you’ve spilled water on MacBook keyboard is to remove the bottom cover from your MacBook. This will allow you to locate any water that has made its way under the casing and prevent or slow down any further damage.

The first thing you need to do is make sure all of the screws on the bottom of your MacBook are loosened before attempting to remove them. Once they are loosened you need to be careful, as some of the screws are very small and can easily be misplaced.

Once all of the screws have been removed, carefully lift up the bottom cover by prying gently. Move around the cover until it pops off, it’s important to make sure all the screws are removed.

Step 3: Remove The battery

Now, after you’ve completely turned off the MacBook and removed the cover, you need to remove the battery as soon as possible. This step applies to MacBooks that have removable batteries only. If you have a MacBook that has a non-removable battery, skip to step 3.

Removing the components in the firing line of the water, and those that are especially vulnerable to the water is key when you’ve spilled water on MacBook keyboards.

Firstly, ground yourself by touching something metal to remove any static electricity. To remove the battery, you need to locate the locking mechanism and slide it away from the battery while holding the release button. Once the battery is out, use a dry cloth to absorb any water from the battery compartment.

Be gentle when drying these components as they can be delicate. Only use a microfiber cloth and make sure you’ve grounded yourself before touching any of the components. Don’t put your MacBook in rice as this will only cause more issues with the rice getting stuck in places it shouldn’t be.

Step 3: Dry The MacBook Keyboard

Now the immediate crisis is over, the next step when you’ve spilled water on MacBook keyboards is to use a cloth and dry the MacBook keyboard. Be sure to dab the keyboard and not wipe it, since wiping can push the water further into the keyboard.

A good tip is to tilt your MacBook to help drain the water out. If you don’t have a dry towel or cloth, you can use a hairdryer on low heat to dry the keyboard. If you’re trying this be careful not to overheat the MacBook by using only low heat and moving the dryer around.

Step 4: Leave your MacBook to dry

After following the previous steps, it’s essential to let your MacBook dry, if you can it’s recommended to wait as long as you can. It’s hard to say how long it takes for the MacBook to dry entirely, but waiting for a minimum of 24 hours is recommended.

During this time, avoid plugging in your MacBook or turning it on.

Step 5: Test Your MacBook

Once you’re sure your MacBook is dry, reassemble the battery, plug the charger in, and turn it on. Test the keyboard to make sure everything is working as it should be. If one or more keys are not working, check out our guide here on fixing MacBook keyboards.

If you’ve damaged any of your components like your trackpad or keyboard, it may feel devastating – especially if you don’t have the money to fix it. However, you can purchase third-party seller Mac devices like these keyboards and mouse deals. It’s not ideal as we all know how we feel about our MacBooks, but it’s a cost-effective approach to solving your issue.

Conclusion:

Accidents happen, but that doesn’t mean you have to panic and worry. Spilling water on your MacBook keyboard can cause a lot of damage, but with the right steps, you can save it from further harm.

From turning off your MacBook, removing the power sources, and drying it entirely, you have everything you need to know in this ultimate guide. Remember to stay calm, follow the steps, and don’t try to turn your Mac on too soon.

Have you ever experienced spilled water on MacBook keyboards? How did you deal with it? Share your experience with us in the comments below.

The post How-to Guide for Spilled Water on Your MacBook Keyboard: first appeared on Macally Blog.

Best Accessories for MacBook Air

David Chen — Fri, 16 Jun 2023 09:44:33 +0000

s an Apple user, there’s nothing more frustrating than encountering a problem with your device. One of the more aggravating issues is the MacBook touchpad not working. It can be infuriating when you’re trying to get work done, and your progress is interrupted by finding your touchpad unresponsive.

Googling the issue is often overwhelming and can leave you feeling lost. That’s why we’ve put together this guide to help you navigate this issue with ease. Keep reading to learn how to fix your MacBook touchpad when it stops working.

Checking Your Trackpad Settings Can Fix Your MacBook Touchpad Not Working

When running into the MacBook touchpad not working issue, you should always start simple. The first thing you need to do is check your trackpad settings. It’s possible that your settings might have been accidentally changed, or an update could have affected them.

To check your settings, navigate to your ‘System Preferences’ and click on ‘Trackpad’. Make sure there are no settings affecting the trackpad sensitivity, the best way to ensure the issue isn’t being caused by the settings is a reset. To reset your trackpad settings, click ‘Reset Trackpad’ at the bottom of the window and then restart your computer.

Try Restarting Your MacBook

After you have ruled out the settings, try the next easiest fix. Often, the simplest solutions can be the most effective. Restarting your MacBook might be all that’s needed to fix the problem.

To restart your MacBook, click on the Apple menu, then click on ‘Restart’. Give your device a few minutes before turning it back on. Check if your touchpad is working after it’s restarted. This will reset your device’s components to ensure if any slight malfunction occurs, reset it back to its original functioning.

There is a possibility of internal component failure, if you are encountering this issue keep in mind it may lead to a repair bill. If money is a concern, it may be a good idea to try a third-party seller like this one. Purchasing a mouse to use instead of your touchpad is a much more affordable option.

Force Quit Applications

The next thing to try is to see if any other applications you have open could be affecting your touchpad. If your touchpad still isn’t working after checking your settings, try force quitting any applications that could be interfering

It’s possible that a particular app is creating a conflict that results in your touchpad not working. Go to the Apple menu and then click on ‘Force Quit’. Select the app that you think might be causing the issue, then click on ‘Force Quit’.

Do this one by one on all open applications and see if your touchpad starts working. This will allow you to work out which application is causing your issue or if it is causing your problem.

Perform A Diagnosis Check

If the previous fixes haven’t fixed your MacBook touchpad, not working issue, it’s time to perform a diagnosis check. This will help determine if there are any hardware issues that need to be addressed.

MacBooks can be easily diagnosed by navigating to Apple’s Hardware Diagnostics website and following the instructions on the page. MacBooks have an in-built diagnostic system that makes identifying hardware issues relatively simple

To perform the diagnostic check, completely turn off your device, lay it on a flat surface, and unplug all devices like USB-mouses and keyboards. Next, determine what processor your device is using, you can use this site here to help – this will be important for the next step.

For Apple Silicon devices, hold down the power button while the device is turning on. Keep holding it until you see the startup options window, then release. This will include a gear icon labeled ‘Options’. Then, press Command (⌘)-D on your keyboard.

For Intel processor devices, turn on your device and hold the ‘D’ key down while powering it on. Release when you see a progress bar or you’re asked to choose a language.

After the diagnostic has been run it should give you an error code depending on the issue, or no code if you’re lucky and your device has no hardware issues. You can easily identify your code from this site here. The following codes mean your touchpad has a hardware issue:

NDR001
NDR003
NDR004
NDR005
NDR006

If you see one of these codes, it may mean your MacBook touchpad not working issue is hardware related and will need replacing. Or as mentioned earlier, you could use a third-party peripheral device, like a mouse, as a cost-effective solution to continue using your device. We recommend this seller here for high-quality, affordable devices.

Make An Appointment With An Apple Store

If you have found a hardware fault, or if none of the above solutions work, it’s time to visit an Apple Store. The qualified professionals at Apple can help fix your MacBook touchpad and any other problems you might be experiencing. You can make an appointment at an Apple store online or by booking from your device’s Apple Support app.

Conclusion:

It can be frustrating when you encounter the MacBook touchpad not working issue. But as this guide shows, there are several things you can do to solve the problem. From checking your settings to making an appointment with an Apple Store, these tips can help you identify and fix the issue in no time.

Remember, if the problem persists, it may be time to think about replacing the component. Or to purchase a device like this one for a cost-effective solution.

The post Best Accessories for MacBook Air first appeared on Macally Blog.

Fixing MacBook Keys Sticking With This Simple Trick

David Chen — Wed, 08 Mar 2023 19:57:23 +0000

Are you frustrated by your MacBook keys sticking? Sticky keys can be a common problem for MacBook users, whether you have a MacBook Pro or a MacBook Air. It can be frustrating when your keyboard is not working properly, but don’t worry! In this blog post, we will provide you with a simple trick on how to fix sticky MacBook keys. Now, let’s dive into the steps to fix sticky MacBook keys:

First, How to Clean Macbook Keyboard

Step 1: Turn off your MacBook:

The first step to fix sticky keys on your MacBook is to turn off your device. This will help prevent any accidental clicks or key presses while you’re cleaning your keyboard.

Step 2: Clean your Keyboard:

Once your MacBook is turned off, it’s time to clean your keyboard. Use a soft, dry cloth to gently wipe your keys. Be careful not to press too hard or use any liquid cleaners as this can damage your keyboard. If you need to clean under the keys (watch this), use a can of compressed air to blow out any dust or debris.

How To Turn Off Stick Keys on MacBooks and Mac

If your keyboard is still sticking after cleaning it, you may need to turn off sticky keys. Sticky keys is a feature on your MacBook that makes it easier to use keyboard shortcuts by allowing you to press one key at a time instead of multiple keys at once. However, it can also cause keys to stick if it’s accidentally turned on.

Here’s how to turn off sticky keys:
1. Go to System Preferences > Accessibility > Keyboard
2. Uncheck the box next to “Enable Sticky Keys”

If You Can't Afford Apple Repair, Buy A Keyboard

Hey, if you can’t afford a couple hundred dollar price tag, it’s probably best to just snag a wired keyboard (if your ports are working) or a Bluetooth keyboard (if you don’t want the cable clutter). With that said, here are some popular Keyboard go-to options:

Macally Wired Keyboard $19

The ultimate budget keyboard for work - this USB keyboard is spill proof and 15 Apple shortcuts to maximize productivity.

Macally Bluetooth Keyboard $49

Aims to supply stunning aesthetics with reasonable functionality without a debilitating price tag.

In conclusion, having sticky MacBook keys can be frustrating, but don’t worry! Follow these simple steps to fix your sticky keys and get your MacBook keyboard working properly again. Remember to clean your keyboard regularly and turn off sticky keys if you’re not using it. If all else fails, contact Apple repair for assistance or even purchase a keyboard if you can’t afford to fix your macbook.

The post Fixing MacBook Keys Sticking With This Simple Trick first appeared on Macally Blog.

Mac Won’t Turn On? Easy Fixes Here

David Chen — Wed, 08 Feb 2023 21:15:13 +0000

If your Mac or MacBook won’t turn on, it can be a frustrating and confusing experience. However, there are a few things you can try to get your device up and running again. In this blog, we will go over some common causes of a Mac or MacBook that won’t turn on, and what you can do to fix them.

First and foremost, make sure that your Mac or MacBook is plugged in and that the power outlet is working. It may seem obvious, but sometimes the solution is as simple as making sure that your device is properly plugged in. If your device is plugged in and the power outlet is working, but your Mac or MacBook still won’t turn on, then it’s time to move on to the next steps.

Your Mac or MacBook Might Have A Dead Battery

Another common cause of a Mac or MacBook that won’t turn on is a dead battery. If your device is not plugged in, try plugging it in and see if it turns on. If it does, your battery may be dead and you’ll need to replace it. We’ll be coming out with a guide on how to replace MacBook batteries in the near future. However, there are some good tips for the time being from iFixit.

If The Battery is Fine, Then it's Probably Software Related

If booting in safe mode doesn’t work, you can try resetting your device’s NVRAM (non-volatile random-access memory) or PRAM (parameter random-access memory).

To do this for Intel Macbooks, turn off your Mac or MacBook, then hold down Command + Option + P + R keys. Keep holding the keys down until you hear the startup sound twice. This will cause the device to reset its NVRAM or PRAM, which can help resolve some software issues.

Note: For M1 MacBooks, the system checks the NVRAM upon boot. All you need to do is shut your MacBook down completely, wait about a minute, then boot it back up. We presume the M2 MacBook NVRAM reset is achieved the same way. However, we still need to do further research.

The Last Resort... Take It In

If none of these solutions work, it’s possible that your Mac or MacBook has a hardware issue. In this case, it’s best to take it to an Apple Store, Apple Genius Bar, or authorized repair center for further diagnosis and repair.

In conclusion, if your Mac or MacBook won’t turn on, there are several things you can try to fix the problem. These include checking the power outlet, trying to boot in safe mode, resetting NVRAM or PRAM, booting from an external drive, or taking it to an Apple Store or authorized repair center. Remember, don’t panic and try to troubleshoot step by step.

The post Mac Won’t Turn On? Easy Fixes Here first appeared on Macally Blog.

Macbook repair - Macally Blog

How-to Guide for Spilled Water on Your MacBook Keyboard:

Table of Contents

Step 1: Turn Off Your MacBook

Step 2: Remove The MacBook Bottom Cover

Step 3: Remove The battery

Step 3: Dry The MacBook Keyboard

Step 4: Leave your MacBook to dry

Step 5: Test Your MacBook

Conclusion:

Best Accessories for MacBook Air

Table of Contents

Checking Your Trackpad Settings Can Fix Your MacBook Touchpad Not Working

Try Restarting Your MacBook

Force Quit Applications

Perform A Diagnosis Check

Make An Appointment With An Apple Store

Conclusion:

Fixing MacBook Keys Sticking With This Simple Trick

Table of Contents

First, How to Clean Macbook Keyboard

Step 1: Turn off your MacBook:

Step 2: Clean your Keyboard:

How To Turn Off Stick Keys on MacBooks and Mac

Other Solutions For Fixing Mac Sticky Keys

Check for Updates

Contact Apple Repair

If You Can't Afford Apple Repair, Buy A Keyboard

Mac Won’t Turn On? Easy Fixes Here

Table of Contents

Your Mac or MacBook Might Have A Dead Battery

If The Battery is Fine, Then it's Probably Software Related

The Last Resort... Take It In