MacOS - Macally Blog

Fix Mac Mouse Not Working: Step-by-Step Guide

David Chen — Wed, 10 May 2023 19:42:32 +0000

Experiencing issues with your Mac mouse not working can be frustrating, whether it’s an Apple Magic Mouse, a USB mouse, or a wireless one. Here’s a step-by-step guide to help you troubleshoot and fix any type of mouse problem for you Mac:

How To Fix Mouse Not Working Mac

Check the mouse’s power and batteries:

Ensure your Apple Magic Mouse or wireless mouse has adequate battery power. Replace batteries if necessary and check if the issue persists.

Restart your Mac:

Sometimes, a simple restart can resolve various issues. Reboot your Mac and see if the mouse starts working again.

Check for physical issues:

Inspect your mouse for any visible damage, dirt, or debris that could obstruct the sensor or buttons. Clean the mouse carefully if needed.

Verify Bluetooth is enabled:

If you’re using a Bluetooth mouse, ensure Bluetooth is turned on in your Mac’s System Preferences. If it’s off, enable it and try connecting your mouse again.

Remove and re-add the mouse:

In System Preferences, go to “Bluetooth” and remove the mouse from the list of connected devices. Then, try re-adding it by clicking the “+” button and following the on-screen instructions.

Check USB connections:

For a USB mouse, make sure it’s securely connected to your Mac. If possible, test the mouse on another device or try a different USB port on your Mac to rule out hardware issues.

Update macOS:

Outdated macOS versions can cause connectivity issues. Go to System Preferences > Software Update to check for and install any available updates.

Adjust mouse settings:

Navigate to System Preferences > Mouse to verify your settings, such as tracking speed, scrolling, and primary mouse button. Adjust as needed to see if the issue is resolved.

Reset the SMC (System Management Controller):

For MacBook Pro and MacBook Air, shut down your Mac and unplug the power cable. Press and hold Shift + Control + Option and the Power button for 10 seconds. Release the keys, reconnect the power cable, and restart your Mac. For iMac, Mac Mini, or Mac Pro, unplug the power cable, wait for 15 seconds, plug it back in, and restart your Mac.

What To Do If Your Keyboard Still Doesn't Work

If none of these steps work, consider contacting Apple Support or visiting an Apple Store for further assistance.

The post Fix Mac Mouse Not Working: Step-by-Step Guide first appeared on Macally Blog.

Mac Keyboard Not Connecting: Quick Fixes

David Chen — Wed, 10 May 2023 18:57:03 +0000

As a Mac user, experiencing issues with your keyboard not connecting can be frustrating. Whether it’s a wireless or Bluetooth keyboard, there are a few quick fixes you can try to resolve the problem. Here’s a step-by-step guide to help you troubleshoot and reconnect your Mac keyboard:

How To Fix Keyboard Not Connecting Mac

Check the keyboard’s power and batteries:

Ensure that your Apple Magic Keyboard or other wireless keyboards have adequate battery power. If your keyboard uses batteries, replace them and see if the issue persists.

Restart your Mac:

Sometimes, a simple restart can fix a variety of issues. Reboot your Mac and check if your keyboard starts working again.

Verify Bluetooth is enabled:

Ensure that Bluetooth is turned on in your Mac’s System Preferences. If it’s off, enable it and try connecting your Bluetooth keyboard again.

Remove and re-add the keyboard:

In System Preferences, go to “Bluetooth” and remove the keyboard from the list of connected devices. Then, attempt to re-add it by clicking the “+” button and following the on-screen instructions.

Reset your Mac’s Bluetooth module:

Press and hold Shift + Option and click on the Bluetooth icon in the menu bar. Select “Debug” and then “Reset the Bluetooth module.” Restart your Mac and try reconnecting your keyboard.

Check for macOS updates:

Outdated macOS versions can cause connectivity issues. Head to System Preferences > Software Update to check for and install any available updates.

Reset NVRAM (Non-Volatile Random-Access Memory):

Shut down your Mac and then power it on. Immediately press and hold Option + Command + P + R for 20 seconds. Release the keys after the Apple logo appears and disappears twice.

What To Do If Your Keyboard Still Doesn't Work

If none of these steps work, consider contacting Apple Support or visiting an Apple Store for further assistance.

The post Mac Keyboard Not Connecting: Quick Fixes first appeared on Macally Blog.

Mac Won’t Turn On? Easy Fixes Here

David Chen — Wed, 08 Feb 2023 21:15:13 +0000

If your Mac or MacBook won’t turn on, it can be a frustrating and confusing experience. However, there are a few things you can try to get your device up and running again. In this blog, we will go over some common causes of a Mac or MacBook that won’t turn on, and what you can do to fix them.

First and foremost, make sure that your Mac or MacBook is plugged in and that the power outlet is working. It may seem obvious, but sometimes the solution is as simple as making sure that your device is properly plugged in. If your device is plugged in and the power outlet is working, but your Mac or MacBook still won’t turn on, then it’s time to move on to the next steps.

Your Mac or MacBook Might Have A Dead Battery

Another common cause of a Mac or MacBook that won’t turn on is a dead battery. If your device is not plugged in, try plugging it in and see if it turns on. If it does, your battery may be dead and you’ll need to replace it. We’ll be coming out with a guide on how to replace MacBook batteries in the near future. However, there are some good tips for the time being from iFixit.

If The Battery is Fine, Then it's Probably Software Related

If booting in safe mode doesn’t work, you can try resetting your device’s NVRAM (non-volatile random-access memory) or PRAM (parameter random-access memory).

To do this for Intel Macbooks, turn off your Mac or MacBook, then hold down Command + Option + P + R keys. Keep holding the keys down until you hear the startup sound twice. This will cause the device to reset its NVRAM or PRAM, which can help resolve some software issues.

Note: For M1 MacBooks, the system checks the NVRAM upon boot. All you need to do is shut your MacBook down completely, wait about a minute, then boot it back up. We presume the M2 MacBook NVRAM reset is achieved the same way. However, we still need to do further research.

The Last Resort... Take It In

If none of these solutions work, it’s possible that your Mac or MacBook has a hardware issue. In this case, it’s best to take it to an Apple Store, Apple Genius Bar, or authorized repair center for further diagnosis and repair.

In conclusion, if your Mac or MacBook won’t turn on, there are several things you can try to fix the problem. These include checking the power outlet, trying to boot in safe mode, resetting NVRAM or PRAM, booting from an external drive, or taking it to an Apple Store or authorized repair center. Remember, don’t panic and try to troubleshoot step by step.

The post Mac Won’t Turn On? Easy Fixes Here first appeared on Macally Blog.

MacOS - Macally Blog

Fix Mac Mouse Not Working: Step-by-Step Guide

Table of Contents

How To Fix Mouse Not Working Mac

Check the mouse’s power and batteries:

Restart your Mac:

Check for physical issues:

Verify Bluetooth is enabled:

Remove and re-add the mouse:

Check USB connections:

Update macOS:

Adjust mouse settings:

Reset the SMC (System Management Controller):

What To Do If Your Keyboard Still Doesn't Work

Mac Keyboard Not Connecting: Quick Fixes

Table of Contents

How To Fix Keyboard Not Connecting Mac

Check the keyboard’s power and batteries:

Restart your Mac:

Verify Bluetooth is enabled:

Remove and re-add the keyboard:

Reset your Mac’s Bluetooth module:

Check for macOS updates:

Reset NVRAM (Non-Volatile Random-Access Memory):

What To Do If Your Keyboard Still Doesn't Work

Mac Won’t Turn On? Easy Fixes Here

Table of Contents

Your Mac or MacBook Might Have A Dead Battery

If The Battery is Fine, Then it's Probably Software Related

The Last Resort... Take It In